Orem, UT
Blown-In Insulation in Orem, Utah
Need blown-in insulation work in Orem? Tell us about your project and LokalMatch will help you find local insulation contractors that match what you need.
- Free for homeowners
- No obligation to hire
Blown-in insulation services in Orem
Orem insulation contractors
Results are ordered by how well they match your service and area — not by who pays. How we rank prosHow we verify pros
What to know about Blown-In insulation
Blown-in insulation covers two jobs that share a machine and nothing else. Loose-fill poured or blown onto an open horizontal surface settles under its own weight and is measured in depth. Dense-pack, blown under pressure into a closed wall cavity through a drilled hole, is measured in pounds per cubic foot and is as much an air sealing measure as an insulating one. DOE's Building America guideline is specific about the difference: cellulose should be installed at a recommended density of 3.25 to 4.0 pounds per cubic foot and fiberglass fibers at 1.6 pounds per cubic foot, because the material must reach the required density throughout the entire cavity to reduce the risks of convective looping, settling and air leakage.
Read our full guide to Blown-In insulationBlown-in insulation costs in Orem
Prices depend on the details of your project. We only publish price ranges when they’re backed by real LokalMatch quote data or reliable sources. Until then, here’s what usually changes the price:
- Area to insulate: attic, walls, basement or crawl space
- Type of insulation
- Removal of old insulation
- Air sealing work
- Access to the space
- Ventilation changes
How to choose insulation contractors in Orem
- Choose a contractor who talks about air sealing and ventilation, not only adding more insulation.
- Ask them to check the attic or walls for moisture, mould, old wiring or insulation that may contain asbestos before starting.
- Get a written quote that states the type of insulation, the areas covered and the target insulation level.
- For spray foam, ask about their training, curing time and when it's safe to be back in the home.
- Consider an energy audit before and after the work to see where heat is being lost.
Questions to ask insulation contractors before you hire
- What type of insulation do you recommend for this area, and why?
- Will you seal air leaks before insulating?
- How will you keep the attic properly ventilated?
- What will you do if you find old insulation that may contain asbestos, mould or old wiring?
- For spray foam, how long do we need to stay out of the house?
- Does this work need a permit or an inspection?
Blown-in insulation permits in Utah
Some blown-in insulation work needs a permit or has to meet local bylaws. Rules vary by municipality, so ask your pro whether a permit is needed and who will apply for it — and check with your city or town if you’re unsure.
Licensing in Utah
Consumer protection
Lending and borrowing a licence are both criminal offences in Utah: the lender for aiding and abetting, the borrower for contracting without a licence. Paying an unlicensed worker as a 1099 contractor exposes both of you, because the Division can act against the worker for unlicensed contracting and against you for hiring them.
Sources:Utah DOPL – Contractor licensing frequently asked questions(opens in a new tab)
Guides about blown-in insulation
- ✦
Insulation Contractors guide
Insulation contractors work on the boundary between the conditioned part of a house and everything outside it: the attic floor or roof deck, exterior walls, floors over crawlspaces and unheated garages, basement and…
Read guide - ✦
Attic Insulation guide
Insulating an attic is the highest-value envelope job in most American houses, and the Department of Energy's Building America guidance says so directly: the attic is the first place a contractor should insulate, and…
Read guide - ✦
Basement Insulation guide
A basement wall is the one part of an American house that is cold on one side, wet on the other and made of a material that passes water vapor for its whole life.
Read guide
Blown-In Insulation near Orem
- Blown-In Insulation in Provo7 km
- Blown-In Insulation in Saratoga Springs19 km
- Blown-In Insulation in Lehi20 km
- Blown-In Insulation in Draper26 km
- Blown-In Insulation in Eagle Mountain27 km
- Blown-In Insulation in Sandy33 km
- Blown-In Insulation in Herriman35 km
- Blown-In Insulation in South Jordan38 km
- Blown-In Insulation in Murray42 km
Common blown-in insulation questions
Is LokalMatch free for homeowners?
Yes. You never pay LokalMatch to request quotes or talk to pros. Professionals pay a fee to connect with homeowners whose projects fit their business.
How many pros will contact me?
We introduce you to a small number of relevant pros — usually no more than three — so you’re not flooded with calls. If fewer pros are available in your area, we’ll tell you instead of promising quotes we can’t deliver.
Do I have to hire someone?
No. Requesting quotes doesn’t commit you to anything. Compare your options and hire only if someone is the right fit.
Get blown-in insulation quotes in Orem
Tell us about your blown-in insulation project.